Eng.Mohamed Elsharawy
Curriculum Vitae
CONTACT INFORMATION:
- Name: Mohamed Ahmed Ibrahim ElSharawy
Address: Riyadh, Kingdom of Saudi Arabia. - Cell phone: +966–564714012
Email: eng.melsha3rawy@yahoo.com
PERSONAL INFORMATION:
- Date of Birth: 5/7/1988
Place of Birth: Cairo, Egypt
Citizenship: Egyptian
Gender: Male
Marital Status: Married
Education:
- 2005 – 2010 BSC degree of Biomedical engineering Higher Technology Institute (HTI), Egypt.
- 2002– 2005 Graduation from Dr. Abd El Aziz El Said High School.
- Graduation project : “ Control wheelchair by eye ” Grade: Excellent
Work Experience:
- Working at King Saud University since 12/11/2011 till date.
Title: Researcher, Dental Biomaterials Research Chair.
College of Applied Medical Sciences, King Saud University.
Riyadh, Kingdom of Saudi Arabia.
Responsibility:
1) Technical maintenance of the research center devices.
2) Calibration and periodic maintenance for the research center devices.
3) Research and development of test techniques.
5) Research support for post-graduate students.
- Teaching computer essentials course in biomedical technology department, College of applied medical sciences, King Saud University Since 2012.
- Teaching biomechanics lab in biomedical technology department, King Saud University.
- Teaching Special topics in biomedical engineering laboratory, biomedical technology department, King Saud University.
Published papers:
- Durgesh BH, AlKheraif AA, ElSharawy M, Verrela J, and Vallitu PK,Damage of the interface between an orthodontic bracket and enamel – the effect of some elastic properties of the adhesive material. Mechanics of composite materials 2016; 51(6):1141-1154.
- Ramakrishnaiah R., AlKheraif A.A, ElSharawy M, Alsaleh A. K., Mohamed K. M., and Rehmand IU, A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture.Dental Materials 2015; 31(5):514-521.
- Durgesh BH, AlHijji S, AlKheraif AA, Ramakrishnaiah R, Basavarajappa S., ElSharawy M, Matinlinna PK, A novel saline system as a primer for orthodontic bonding – a pilot study. International Journal of Adhesion and Adhesives 2015; 62:101-106
- Mekkawy MA, Hussein LA, ElSharawy M, Comparative study of surface roughness between polyamide, thermoplastic polymethyl methacrylate and acetal resins flexible denture base materials before and after polishing. Life Science Journal 2015; 12(10):90-95.
- Basavarajappa S, AlKheraif AA, ElSharawy M, Vallitu PK, Effect of solvent disinfectant ethanol on the micro surface structure and properties of multiphase denture base polymers. .Journal of the mechanical behavior biomedical materials 2015 September.
Abstracts/Posters:
- Title: Effect of whitening-toothpastes on surface roughness of different restorative materials, Authors: A. Alqarni, M. Aldhafyan, M. El-Sharawy, F. Abdelmegid, F. Salama - American Association for Dental Research 2016 .
- Title: Surface texture of esthetic restorative materials immersed in fruit beverages Authors (M. Al-Jameel, T. Al-Rasheed, F. Abdelmegid, M. El-Sharawy ,F. Salama ,Accepted as a poster presentation at IADR/AADR/CADR - International Association of Dental Research General Session 2015 CONTROL ID: 2106837
Honors and Awards:
- 2014 Effects of fruit drinks on roughness of esthetic restorative materials.
- Selected as the winner of the 5th KSU Student Scientific Symposium from College of Dentistry.
- Selected as the finalist from College of Dentistry to the 5th KSU Student Scientific Symposium.
- Selected as the finalist from King Saud University to participate in the 5th Scientific Conference of Higher Education.
- First Prize in Poster Session of King Saud University 15th and the 25th Saudi Dental Society International Dental Conference.
Training history
- 2014
- Training program for Six sigma Green Belt at Integral Management & quality solution inc. Florida, U.S.A. 120 hrs.
- 2013
- Training on UMT Apex system containing Micro and Nano Indentation and Tribology testing like Scratch and wear with a 2D force sensor at Bruker Nano GmbH co. .
- Training on Bruker contour GT (surface profile meter) at Naizak co.
- Workshop on the educational Activity Titled Saudi Health 2013 Provided by Ministry of Health, Riyadh, Kingdom of Saudi Arabia.
- 2012
- Training course on Finite element analysis with ANSYS examples at National Research Center - Mechanical Engineering Department.
- Training course on Solid works Simulation (FEA) at CAD CAM CIM co.
- Workshop on the necessary scientific considerations before publication in (ISI) journals at King Saud University.
- Training on Toothbrush machine simulator from SD Mechatronik GmbH.
- 2010
- Training on (GI flexible endoscopy) at ENDOTECH Company for medical equipment & supplies.
- Training on CT systems & MRI at Siemens Technologies Company.
- 2009
- Training on (infusion & syringe pump – endoscopes) at Egyptian Group Company.
- 2008
- Course on (Ventilators – MRI –x-ray – Dental units- Sterilization- Endoscopes- Ophthalmology- Ultra Sound-Anesthesia machine - Linear accelerator - Hospital design) at NTI by instructors of CASBEC Center at Cairo University.
- 2007
- Basic electronics course at BTC (Bahgat Training Center) at Egypt.
- Introduction to medical devices and equipment at elsadrelabasya Hospital, bahgat hospital & cancer hospital (57357)such as (ECG – Pacemaker – Infusion pump – Defiblerator – Operating Rooms).
o 2005
o Industrial technology introduction in HTI (Higher Technology Institute) workshops, trained to use milling, lathing, and shaping machines also learned the welding types.
Instrumental Techniques experiences:
- Nano and micro Indentation Tester.
- Scanning electron microscope.
- The Micro Tensile test Machine.
- Micro computed tomography (MCT).
- Atomic Force Microscope
- Shear Bond Strength Tester.
- Tensiometer for measuring contact angle and surface tension.
- Profile meter for surface roughness test (Contact and non-contact profile).
Attendance Certificates
- Fujairah international Dental Conference at United Arab Emirates.
- 15-17/11/2012
- Jaw function: Beyond the realm of dentistry Seminar At the college of applied medical Sciences (CAMS). 22/12/2011
- Laser Applications in Dentistry Seminar at the college of applied medical Sciences (CAMS). 18/12/2011
- Infection control guide lines in dentistry Seminar at the college of applied medical Sciences (CAMS). 14/12/2011
- The radiology educational activities 2008 (Riyadh). 30/3/2008
Skills
- Computer Skills:
- Excellent knowledge of windows, Office, internet and computer maintenance.
- ( Imaging Software ) Photoshop.
- (CAD Software) AutoCAD, Solid works, Geomagic, Mimics software & Simple ware.
- (Finite element analysis software) ANSYS & Solid works simulation.
- (Simulation and drawing electrical circuits) Eagle layout &Proteus.
- (Statistics analysis software) SPSS.
- Language Skills:
- Native language Arabic.
- Good command of both written and spoken English.
- Academic IELTS overall score : 5.5
- Fair command of both written and spoken German.
· Interpersonal skills:
- A very motivated and active individual with excellent managerial skill and strives for success. Competitive, Confident, Practical.
- Open-minded with Communication skills and ability to work under pressure and with a teamwork.
- Research interests
- Industrial and Biomedical technology.
- Coupling finite element analysis (FEA) results with experimental observations.
- Fracture and fatigue of engineering materials.
- Biomaterials.
Note: training certifications & References are available upon request.